RIGHT 5/8" NUT + NUT CAP + SPACER + 1 PAIR OF BALDOR FLANGES. Loose Section 2ea- Canton Flannel Buffs

2ea- Canton Flannel Buffs

Directions for use: While the buffing wheel is spinning move the rake into the buff slow enough so that the rake is not pulled from your hand

Spiral thread allows wheel to spin up tapered shaft when motor is turned on

the finishing / coloring buff needs to be raked every 5 minutes because that process does not build up as much heat

RIGHT 5/8" NUT + NUT CAP + SPACER + 1 PAIR OF BALDOR FLANGES. Loose Section 2ea- Canton Flannel BuffsRight side 5 8 HP Baldor Buffer Kit, includes Right 5 8" nut + nut cap + spacer + 1 pair of Baldor Flanges. (Baldor part #HA6096). Safety first Always wear adequate & proper EYE, EAR, FACE, BODY and RESPIRATORY PROTECTION while polishing and buffing. Made in the USA